Translations:Einzugsgebiet/26/en: Unterschied zwischen den Versionen

Aus TALSIM Docs
(Die Seite wurde neu angelegt: „In the case of permeable surfaces, infiltration into the soil cannot be neglected, since this has a decisive influence on the runoff. For the calculation three…“)
 
Keine Bearbeitungszusammenfassung
 
Zeile 1: Zeile 1:
In the case of permeable surfaces, infiltration into the soil cannot be neglected, since this has a decisive influence on the runoff. For the calculation three approaches were implemented in the model:
In the case of permeable areas, infiltration into the soil cannot be neglected, since this has a decisive influence on the runoff. For the calculation three approaches are implemented in the model:
# Constant discharge coefficient <math>\Psi</math>
# Constant discharge coefficient <math>\Psi</math>
# Event-specific discharge coefficient based on the Soil-Conservation-Service (SCS) method
# Event-specific discharge coefficient based on the Soil-Conservation-Service (SCS) method
# Soil moisture simulation
# Soil moisture simulation

Aktuelle Version vom 25. November 2020, 12:13 Uhr

Information zur Nachricht (bearbeiten)
Zu dieser Nachricht ist keine Dokumentation vorhanden. Sofern du weißt, wo und in welchem Zusammenhang sie genutzt wird, kannst du anderen Übersetzern bei ihrer Arbeit helfen, indem du eine Dokumentation hinzufügst.
Nachricht im Original (Einzugsgebiet)
Bei den durchlässigen Flächen kann die Infiltration in den Boden nicht vernachlässigt werden, da diese das Abflussgeschehen entscheidend prägt. Für die Berechnung wurden drei Ansätze im Modell implementiert:
# Konstanter Abflussbeiwert <math>\Psi</math>
# Ereignisspezifischer Abflussbeiwert in Anlehnung an das Verfahren des Soil-Conservation-Service (SCS)
# Bodenfeuchtesimulation

In the case of permeable areas, infiltration into the soil cannot be neglected, since this has a decisive influence on the runoff. For the calculation three approaches are implemented in the model:

  1. Constant discharge coefficient [math]\displaystyle{ \Psi }[/math]
  2. Event-specific discharge coefficient based on the Soil-Conservation-Service (SCS) method
  3. Soil moisture simulation