Bereich Varianten/en: Unterschied zwischen den Versionen

Aus TALSIM Docs
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
 
(48 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 4: Zeile 4:
__TOC__
__TOC__


In the scenarios' section, new projects and variants can be created and managed. By right-clicking, on a project or a variant in the scenarios' section, either a menu entailing the same options as the [[Special:MyLanguage/Menüleiste_Systemverwaltung|menubar]] or a selection of the relevant options appear respectively.
In the scenarios' section, new projects and variants can be created and managed. By right-clicking, on a project or a variant in the scenarios' section, either a menu entailing the same options as the [[Special:MyLanguage/Menüleiste_Systemverwaltung|menu bar]] or a selection of the relevant options appear respectively.




Zeile 37: Zeile 37:


   
   
To edit the settings for the project, right-click on ''Project 1 → Edit''. The window corresponds to the one from [[Special:MyLanguage/Bereich_Varianten#Neues Projekt anlegen|Create new project]].
To edit the settings of the project, right-click on ''Project 1 → Edit''. The appearing window corresponds to the window for [[Special:MyLanguage/Bereich_Varianten#Neues Projekt anlegen|creating a new project]].


[[Datei:Benutzeroberfläche00038_EN.png|Datei:Benutzeroberfläche00038_EN.png]]
[[Datei:Benutzeroberfläche00038_EN.png|Datei:Benutzeroberfläche00038_EN.png]]
Zeile 44: Zeile 44:
=== Delete Project===
=== Delete Project===


If you want to delete a project, right click on ''Project 1 → delete''. All variants and simulations belonging to the project will be deleted.
If you want to delete a project, right-click on ''Project 1 → delete''. All variants and simulations belonging to the project will also be deleted.
For this reason the following window opens with a warning question:
For this reason, the following warning appears:


[[Datei:Benutzeroberfläche00039_EN.png|Datei:Benutzeroberfläche00039_EN.png]]
[[Datei:Benutzeroberfläche00039_EN.png|Datei:Benutzeroberfläche00039_EN.png]]




==Variant==
==Scenario==


To create a project area, a variant must be created. Each variant has its own project structure for which different simulations are performed. All simulations within a variant therefore have the same project structure and differ only in small changes of parameters. For large or small changes in the project structure it is recommended to create a new variant.
To set up a flow network, a scenario must be created. Each scenario has its own, unique flow network map, for which different simulations can be run. All simulations within a scenario, hence, have the same flow network map and can only differ in calibration parameters, the simulation period or the simulation timestep. For changes in the flow network map, it is recommended to create a new scenario.


You can use the following buttons if you click on the variant in the [[Special:MyLanguage/Systemverwaltung|system administration]] on the right:
By right-clicking on a scenario in the [[Special:MyLanguage/Systemverwaltung|project manager]] you get the following options:




=== Create new variant===
===New Scenario===


To create a variant open the project manager under ''Menu bar → Talsim → Project manager''. Now click with the right mouse button in the project manager on the activated project and select ''Create new variant''.
To create a new scenario open the project manager under ''Menu bar → Talsim → Project manager''. Now right-click on the active project in the project manager and select ''New scenario''.


[[Datei:Benutzeroberfläche00025_EN.png|Datei:Benutzeroberfläche00025_EN.png]]
[[Datei:Benutzeroberfläche00025_EN.png|Datei:Benutzeroberfläche00025_EN.png]]


The dialog window ''Create system variant'' opens, in which information (name, description, export settings) for the variant are saved. Under Export settings, the path for the folder is specified in which the data record of the variant is to be saved during an export.  
The dialog box ''Create new scenario'', in which information (name, description, export settings) about the scenario is saved, appears. Under Export settings, the path of the folder, in which the dataset of the scenario is to be saved during an export, is specified.  


Under Options you can set whether the rules in the state groups should be edited.
Under "Options" you can set, whether the rules in the control clusters should be edited.


{| class="wikitable"
{| class="wikitable"
|-
|-
|'''All rules are to be edited''' ||All rules in the state groups can be edited. This is recommended if you work on the project yourself.
|'''All rules can be edited''' ||All rules in the control clusters can be edited. This option is recommended if you work on the project yourself.
|-
|-
|'''Only released rules can be edited''' ||In the state groups it can be set whether the rule can be edited or not. Only released rules can be edited. This is recommended if you pass the model to another editor and certain rules should not be changed.
|'''Only enabled rules can be edited''' ||In the control clusters you can choose, whether a rule can be edited or not. Only enabled rules can be edited. This is recommended if you pass a model, where certain rules should not be changed, to another editor.  
|-
|-
|'''No rule can be edited''' ||The rules in the state groups cannot be edited. This is recommended if the model is given to a third party and no changes are to be made.
|'''No rules can be edited''' ||The rules in the control clusters cannot be edited. This is recommended if the model is given to a third party and no changes are to be made.
|-
|-


Zeile 80: Zeile 80:
[[Datei:Benutzeroberfläche00026_EN.png|Datei:Benutzeroberfläche00026_EN.png]]
[[Datei:Benutzeroberfläche00026_EN.png|Datei:Benutzeroberfläche00026_EN.png]]


A new empty and inactive variant was created with an equally empty and inactive simulation. The variant has to be activated before it can be edited like the project.
By clicking OK a new empty and inactive scenario, including a likewise empty and inactive simulation is created. The scenario has to be activated before it can be edited.




Zeile 87: Zeile 87:
To activate an existing scenario, right-click on the corresponding variant and select "activate".
To activate an existing scenario, right-click on the corresponding variant and select "activate".


[[Datei:Benutzeroberfläche00027_EN.png|Datei:Benutzeroberfläche00027_EN.png]] → [[Datei:Benutzeroberfläche00028_EN.png|Datei:Benutzeroberfläche00028_EN.png]]
[[Datei:Benutzeroberfläche00028_EN.png|Datei:Benutzeroberfläche00028_EN.png]]




===Edit Scenario===
===Edit Scenario===


To edit the settings for the variant, right click ''Variant 1 -> edit''. The window corresponds to the one from [[Special:MyLanguage/Bereich_Varianten#Neue Variante anlegen|create new variant]].
To edit the settings of the scenario, right-click ''Scenario 1 → edit''. The appearing window corresponds to the window [[Special:MyLanguage/Bereich_Varianten#Neue Variante anlegen|"create new scenario"]].


[[Datei:Benutzeroberfläche00042_EN.png|Datei:Benutzeroberfläche00042_EN.png]]
[[Datei:Benutzeroberfläche00042_EN.png|Datei:Benutzeroberfläche00042_EN.png]]
Zeile 99: Zeile 99:
===Delete Scenario===
===Delete Scenario===


If you want to delete a scenario, right click on ''Scenario 1 → delete''. All simulations belonging to the scenario are deleted.  
If you want to delete a scenario, right-click on ''Scenario 1 → delete''. All simulations belonging to the scenario will also be deleted.  


[[Datei:Benutzeroberfläche00043_EN.png|Datei:Benutzeroberfläche00043_EN.png]]
[[Datei:Benutzeroberfläche00043_EN.png|Datei:Benutzeroberfläche00043_EN.png]]
Zeile 106: Zeile 106:
=== Copy Scenario===
=== Copy Scenario===


If you want to copy a scenario, right click on ''Scenario 1 → Copy scenario''. The following window with an overview of the copying process opens. If the copying was successful, the scenario is displayed with "Import". An empty and inactive simulation is automatically created. The settings in the simulation (e.g. simulation period) correspond to those from the active initial simulation.
To copy a scenario, right-click on ''Scenario 1 → Copy scenario''. The following window showing an overview of the copying process opens. If the copying was successful, a new scenario labeled "Import:" appears in the scenarios' section. An empty and inactive simulation is automatically created. The settings of that simulation (e.g. simulation period) correspond to those from the active simulation in the original scenario.


[[Datei:Benutzeroberfläche00044.png|Datei:Benutzeroberfläche00044.png]]  '''--->'''  [[Datei:Benutzeroberfläche00045.png|Datei:Benutzeroberfläche00045.png]]
[[Datei:Benutzeroberfläche00044_EN.png|Datei:Benutzeroberfläche00044_EN.png]]  '''→'''  [[Datei:Benutzeroberfläche00045_EN.png|Datei:Benutzeroberfläche00045_EN.png]]


'''Caution:''' To copy a scenario, there must be an active simulation, otherwise the copying process is cancelled. The reason for the absence of an active simulation is the deletion of it.
'''Caution:''' To copy a scenario, it must contain an active simulation, otherwise the copying process is cancelled.




===Export Scenario===
===Export Scenario===


To create an [[Special:MyLanguage/ASCII-Datensatz|ASCII-Dataset]] from a variant and its simulation, you have to export the variant. To do this, right-click on ''Variant 1 -> Export Variant''. The following window will open where you can specify the location and the file name. With '''Save''' the dataset is created.  
To create an [[Special:MyLanguage/ASCII-Datensatz|ASCII-Dataset]] from a scenario and its simulation, you need to export the scenario. To do this, right-click on ''Scenario1 → Export scenario''. The following window, where you can specify the location where the dataset should be saved and the file name, will open. By clicking '''Save''', the dataset is created.  


[[Datei:Benutzeroberfläche00048_EN.png|Datei:Benutzeroberfläche00048_EN.png]]
[[Datei:Benutzeroberfläche00048_EN.png|Datei:Benutzeroberfläche00048_EN.png]]
Zeile 121: Zeile 121:
File Location: D:\Talsim-NG\Customers\Customer_1\projectData\Beispiel\dataSets\
File Location: D:\Talsim-NG\Customers\Customer_1\projectData\Beispiel\dataSets\


File name: Scenario 1
File name: Scenario1


After confirming, a window opens with an overview of the export process.
After confirming, a window, showing an overview of the export process, appears.


[[Datei:Benutzeroberfläche00049_EN.png|Datei:Benutzeroberfläche00049_EN.png]]
[[Datei:Benutzeroberfläche00049_EN.png|Datei:Benutzeroberfläche00049_EN.png]]


The [[Special:MyLanguage/ASCII-Datensatz|ASCII-Dataset]] can now be found in the specified location (default setting is the folder ''dataSets'' of the respective client and user, see also [[Special:MyLanguage/Verzeichnisstruktur|Directory structure]]). The size of the data set depends on the size of your system. The more data and system elements you include in your system, the more files are stored.  
The [[Special:MyLanguage/ASCII-Datensatz|ASCII-Dataset]] can now be found in the specified location (default setting is the folder ''dataSets'' of the respective client and user, see also [[Special:MyLanguage/Verzeichnisstruktur|Directory Structure]]). The size of the dataset depends on the size of your system. The more data and system elements you include in your system, the more files are stored.  


[[Datei:Benutzeroberfläche00050_EN.png|Datei:Benutzeroberfläche00050_EN.png]]
[[Datei:Benutzeroberfläche00050_EN.png|Datei:Benutzeroberfläche00050_EN.png]]


Decisive in [[Special:MyLanguage/ASCII-Datensatz|ASCII-Dataset]] is the *.SYS file, since this is needed for [[Special:MyLanguage/Bereich_Varianten#Variante importieren|importing]].
The *.SYS file in the [[Special:MyLanguage/ASCII-Datensatz|ASCII-Dataset]] is crucial, since it is needed for [[Special:MyLanguage/Bereich_Varianten#Variante importieren|importing the scenario]].


'''Caution:''' To export a variant, there must be an active simulation, otherwise the export process is cancelled. The reason for the absence of an active simulation is the deletion of it.
'''Caution:''' To export a scenario, it must contain an active simulation, otherwise the export process is cancelled.




=== Export Scenario to Server===
=== Export Scenario to Server===


If you want to upload a variant to the server, click with the right mouse button on ''Variant 1 -> Export variant to server''. This is only possible after you have created a system in the variant. Otherwise the error messages will appear.
If you want to upload a scenario to the server, right-click ''Scenario 1 → Export scenario to server''. This is only possible after you have set up a flow network in the scenario. Otherwise the following error messages will appear.


[[Datei:Benutzeroberfläche00046.png|Datei:Benutzeroberfläche00046.png]] [[Datei:Benutzeroberfläche00047.png|Datei:Benutzeroberfläche00047.png]]
[[Datei:Benutzeroberfläche00046_EN.png|Datei:Benutzeroberfläche00046_EN.png]] [[Datei:Benutzeroberfläche00047_EN.png|Datei:Benutzeroberfläche00047_EN.png]]


'''Caution:''' To export a scenario, there must be an active simulation, otherwise the export process is cancelled. The reason for the absence of an active simulation is the deletion of it.
'''Caution:''' To export a scenario, it must contain an active simulation, otherwise the export process is cancelled.




=== Import Scenario===
=== Import Scenario===


If you want to import a dataset in your existing project, right-click on ''Project 1 -> Import scenario''. You need the *.SYS file to import from the dataset.
If you want to import a dataset to your existing project, right-click on ''Project 1 → Import scenario''. For this you will need to provide the *.SYS file of the dataset.
You can find this file for example under:  
You can find this file under:  


D:\Talsim-NG\Customers\Auftraggeber_1\projectData\Beispiel\dataSets
D:\Talsim-NG\Customers\Customer_1\projectData\Beispiel\dataSets


[[Datei:Benutzeroberfläche00051.png|Datei:Benutzeroberfläche00051.png]]
[[Datei:Benutzeroberfläche00051_EN.png|Datei:Benutzeroberfläche00051_EN.png]]


The following window with an overview of the import process opens. If the import was successful, the variant is displayed with "Import: Variant 1". An empty and inactive simulation is also automatically created. The settings in the simulation (e.g. simulation period) correspond to those from the active initial simulation.
The following window showing an overview of the import process opens. If the import was successful, a new scenario labeled "Import:" appears in the scenarios' section. An empty and inactive simulation is automatically created. The settings of that simulation (e.g. simulation period) correspond to those from the active simulation in the imported scenario.


[[Datei:Benutzeroberfläche00052.png|Datei:Benutzeroberfläche00052.png]]    '''--->'''    [[Datei:Benutzeroberfläche00053.png|Datei:Benutzeroberfläche00053.png]]
[[Datei:Benutzeroberfläche00052_EN.png|Datei:Benutzeroberfläche00052_EN.png]]    '''→'''    [[Datei:Benutzeroberfläche00053_EN.png|Datei:Benutzeroberfläche00053_EN.png]]




=== Import variant from server===
=== Import Scenario from Server===




===Import results===
===Import Results===

Aktuelle Version vom 27. November 2020, 13:07 Uhr

Sprachen:

In the scenarios' section, new projects and variants can be created and managed. By right-clicking, on a project or a variant in the scenarios' section, either a menu entailing the same options as the menu bar or a selection of the relevant options appear respectively.


Project

Create New Project

To create a new project, right-click in the scenarios' section then click on New project

Benutzeroberfläche00020 EN.png

The following window, in which the name and a short description of the project are indicated, appears. Click OK to create the project.


Benutzeroberfläche00021 EN.png

Benutzeroberfläche00022 EN.png


Activate Project

In order to edit a project, it must first be activated (Benutzeroberfläche00029.png). To do this, right-click on Project 1 → Activate.

Benutzeroberfläche00040 EN.png

Benutzeroberfläche00023 EN.pngBenutzeroberfläche00024 EN.png


Edit Project

To edit the settings of the project, right-click on Project 1 → Edit. The appearing window corresponds to the window for creating a new project.

Datei:Benutzeroberfläche00038_EN.png


Delete Project

If you want to delete a project, right-click on Project 1 → delete. All variants and simulations belonging to the project will also be deleted. For this reason, the following warning appears:

Datei:Benutzeroberfläche00039_EN.png


Scenario

To set up a flow network, a scenario must be created. Each scenario has its own, unique flow network map, for which different simulations can be run. All simulations within a scenario, hence, have the same flow network map and can only differ in calibration parameters, the simulation period or the simulation timestep. For changes in the flow network map, it is recommended to create a new scenario.

By right-clicking on a scenario in the project manager you get the following options:


New Scenario

To create a new scenario open the project manager under Menu bar → Talsim → Project manager. Now right-click on the active project in the project manager and select New scenario.

Datei:Benutzeroberfläche00025_EN.png

The dialog box Create new scenario, in which information (name, description, export settings) about the scenario is saved, appears. Under Export settings, the path of the folder, in which the dataset of the scenario is to be saved during an export, is specified.

Under "Options" you can set, whether the rules in the control clusters should be edited.

All rules can be edited All rules in the control clusters can be edited. This option is recommended if you work on the project yourself.
Only enabled rules can be edited In the control clusters you can choose, whether a rule can be edited or not. Only enabled rules can be edited. This is recommended if you pass a model, where certain rules should not be changed, to another editor.
No rules can be edited The rules in the control clusters cannot be edited. This is recommended if the model is given to a third party and no changes are to be made.

Datei:Benutzeroberfläche00026_EN.png

By clicking OK a new empty and inactive scenario, including a likewise empty and inactive simulation is created. The scenario has to be activated before it can be edited.


Activate Scenario

To activate an existing scenario, right-click on the corresponding variant and select "activate".

Datei:Benutzeroberfläche00028_EN.png


Edit Scenario

To edit the settings of the scenario, right-click Scenario 1 → edit. The appearing window corresponds to the window "create new scenario".

Datei:Benutzeroberfläche00042_EN.png


Delete Scenario

If you want to delete a scenario, right-click on Scenario 1 → delete. All simulations belonging to the scenario will also be deleted.

Datei:Benutzeroberfläche00043_EN.png


Copy Scenario

To copy a scenario, right-click on Scenario 1 → Copy scenario. The following window showing an overview of the copying process opens. If the copying was successful, a new scenario labeled "Import:" appears in the scenarios' section. An empty and inactive simulation is automatically created. The settings of that simulation (e.g. simulation period) correspond to those from the active simulation in the original scenario.

Datei:Benutzeroberfläche00044_EN.png Datei:Benutzeroberfläche00045_EN.png

Caution: To copy a scenario, it must contain an active simulation, otherwise the copying process is cancelled.


Export Scenario

To create an ASCII-Dataset from a scenario and its simulation, you need to export the scenario. To do this, right-click on Scenario1 → Export scenario. The following window, where you can specify the location where the dataset should be saved and the file name, will open. By clicking Save, the dataset is created.

Datei:Benutzeroberfläche00048_EN.png

File Location: D:\Talsim-NG\Customers\Customer_1\projectData\Beispiel\dataSets\

File name: Scenario1

After confirming, a window, showing an overview of the export process, appears.

Datei:Benutzeroberfläche00049_EN.png

The ASCII-Dataset can now be found in the specified location (default setting is the folder dataSets of the respective client and user, see also Directory Structure). The size of the dataset depends on the size of your system. The more data and system elements you include in your system, the more files are stored.

Datei:Benutzeroberfläche00050_EN.png

The *.SYS file in the ASCII-Dataset is crucial, since it is needed for importing the scenario.

Caution: To export a scenario, it must contain an active simulation, otherwise the export process is cancelled.


Export Scenario to Server

If you want to upload a scenario to the server, right-click Scenario 1 → Export scenario to server. This is only possible after you have set up a flow network in the scenario. Otherwise the following error messages will appear.

Datei:Benutzeroberfläche00046_EN.png Datei:Benutzeroberfläche00047_EN.png

Caution: To export a scenario, it must contain an active simulation, otherwise the export process is cancelled.


Import Scenario

If you want to import a dataset to your existing project, right-click on Project 1 → Import scenario. For this you will need to provide the *.SYS file of the dataset. You can find this file under:

D:\Talsim-NG\Customers\Customer_1\projectData\Beispiel\dataSets

Datei:Benutzeroberfläche00051_EN.png

The following window showing an overview of the import process opens. If the import was successful, a new scenario labeled "Import:" appears in the scenarios' section. An empty and inactive simulation is automatically created. The settings of that simulation (e.g. simulation period) correspond to those from the active simulation in the imported scenario.

Datei:Benutzeroberfläche00052_EN.png Datei:Benutzeroberfläche00053_EN.png


Import Scenario from Server

Import Results