Translations:Berechnungsschema/ Implementierung der Betriebsregeln/19/en: Unterschied zwischen den Versionen
Ferrao (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „# <math>t_1 > \Delta t \,</math> (äußerer Zeitschritt) #: No range change takes place in the considered time interval. # <math>0 < t_1 < \Delta t \,</math>…“) |
Keine Bearbeitungszusammenfassung |
||
(4 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt) | |||
Zeile 1: | Zeile 1: | ||
# <math>t_1 > \Delta t \,</math> ( | # <math>t_1 > \Delta t \,</math> (outer time step) | ||
#: | #: In the considered time interval, no section change takes place . | ||
# <math>0 < t_1 < \Delta t \,</math> | # <math>0 < t_1 < \Delta t \,</math> | ||
#: | #: After the time <code>t<sub>1</sub></code>, there is a section change . The span between <code>t<sub>0</sub></code> and <code>t<sub>1</sub></code> represents the length of the inner time step. | ||
# <math>t_1 < 0 \,</math> | # <math>t_1 < 0 \,</math> | ||
#: There is no | #: There is no storage content increase but a decrease. Instead of the upper section boundary, the lower section boundary must be used and the calculation repeated. |
Aktuelle Version vom 30. August 2021, 11:25 Uhr
- [math]\displaystyle{ t_1 \gt \Delta t \, }[/math] (outer time step)
- In the considered time interval, no section change takes place .
- [math]\displaystyle{ 0 \lt t_1 \lt \Delta t \, }[/math]
- After the time
t1
, there is a section change . The span betweent0
andt1
represents the length of the inner time step.
- After the time
- [math]\displaystyle{ t_1 \lt 0 \, }[/math]
- There is no storage content increase but a decrease. Instead of the upper section boundary, the lower section boundary must be used and the calculation repeated.