Storage Window
| 
| 
The data sheet for the reservoir can be opened by double clicking on the element symbol in the system plan 
or by right clicking → Properties.
It has the two tabs Properties and Settings for simulation.
Properties
The properties tab of reservoir elements is divided into different sections (from top left to the bottom right):
- internal dependencies
- releases
- limits
- base data
- sequences
- rating curves
- loss/external contribution (precipitation, evaporation, infiltration)
In the following, these are discussed in the order in which they are reasonably processed.
Base Data
When creating a new reservoir for the first time, a window containing the base data describing the reservoir appears. Later, the window can be opened by clicking the button Base Data in the upper right corner of the reservoir window. The most important characteristics of the reservoir should be entered here.
The terms for reservoir elements are conceptualized for dams, as the system element was originally developed as a dam element. Thus, for dams, the height and the content are entered for the following positions:
- Bottom (content=0)
- Spillway
- Crest (maximum storage)
For all other reservoirs, instead of the storage volume at crown height, a fictitious value can be specified as the maximum storage. This value will then never exceeded in the model.
It is helpful to complete the base data right at the beginning and to adjust all additional functions in the reservoir element (e.g. rating curve, or function of the spillway) exactly to this base data. If the maximum storage is changed later, you can choose from two options at the bottom of the window on how to proceed with the additional functions of the reservoir element. Either the function values of all functions are adjusted according to the percentage change of the maximum storage volume or the function values are kept unchanged. Choosing the latter option, all supporting points larger than the new maximum storage volume are discarded. Whichever option is chosen, it is important to check all functions for coherence with the desired outcome!
Rating Curve
After entering the base data, it is reasonable to enter the rating curve next. To do this, activate the checkbox next to the (initially grayed out) symbol for the rating curve 
at the bottom left of the window. Later, the rating curve can be edited by clicking the icon. Deactivating the check box deletes the rating curve again.
The rating curve compares the storage volumes in the reservoir with the respective water levels and the water surface. When entering the data, it is important to note that the height and storage volume data must be consistent with the positions for the bottom, spillway and crown that have been entered in the base data section. The first supporting point is always storage volume: 0 | height: bottom height | surface: 0. The last supporting point is storage volume: maximum storage | height: crown height | surface: corresponding maximum surface.
Release
Creating a New Release
To create a new release, click the button Create new release 
in the section Releases of the reservoir window. Afterwards a window appears, in which the class and the type of the release can be selected and a corresponding term can be assigned.
The class of the release can be chosen from Q, adjustable release and K, non adjustable release. The following options are available for the type of levy:
| Kennung | Standardbezeichung EN | Bezeichnung DE |
|---|---|---|
| A | Release | Abgabe |
| W | Water supply | Wasserversorgung |
| R | Standard release | Regelabgabe |
| H | Spillway | Hochwasserentlastung |
| S | Flood control zone | Hochwasserschutzraum |
| M | Minimum release | Mindestabgabe |
| N | Low flow augmentation | Niedrigwasseraufhöhung |
| T | Turbine | Turbine |
| B | Industrial supply | Brauchwasser |
| U | Water transport system | Überleitung |
| D | Dynamic release | Dynamische Abgabe |
The selection of type, class and the input of the designation is mainly informative. The user himself is responsible for entering the data for delivery afterwards. The identification of the levy is made up of three digits: the first letter is determined by the selected class, the second by the selected type, followed by a unique number in the third position, which is assigned in the order in which the levy of the respective class and type is created. The charge identification determines how the simulation results are stored and how the charges can be addressed for the definition of system states. For this purpose, the delivery identifier is appended to the respective system element identifier with underscore, e.g., T100_QA1.
After the delivery has been created, a box with the respective delivery identification appears in the memory window in the area Deliveries.
Edit submission
An already created levy can be edited by double clicking on the box with the levy ID in the Levy section or by right clicking on the box -> edit. A new window opens.
Enable/disable output
To the left of the box with the delivery ID there is a checkbox that can be used to activate and deactivate the delivery. Disabled dispensers are not taken into account in the simulation.
Clear submission
A delivery can be deleted by right-clicking on the identifier to open the context menu and selecting delete.
Sequences
Newly created memory outputs do not yet have an output from the memory. Therefore an allocation to an outlet has to be established first. If the memory element in the system plan is already connected to other system elements connected elements, these elements appear with their identifier in the Sequences area on the right side of the window. A delivery is now assigned to a schedule by connecting them via drag&drop. To do this, drag the box with the ID of the delivery with the left mouse button pressed down onto the box with the ID of the schedule. The created connection is displayed with an arrow. Similarly, an existing connection can be deleted. A run can contain several deliveries.
Limits
Create new limits
To create a new limit for an operating device, click the button Create new limit in the memory window in the Limits area. After that a window appears in which the identification of the border can be selected and a name assigned.
The following options are available for the type of limit of the operating equipment:
| Kennung | Standardbezeichung EN | Bezeichnung DE |
|---|---|---|
| G | Bottom outlet | Grundablass |
| B | Service outlet | Betriebsablass |
| A | Outlet | Auslass |
The selection of the type and the input of the designation is mainly informative and does not affect the calculation. The identification of the boundary is made up of three digits: the first letter is always "G", the second is determined by the selected type, followed by a unique number at the third position, which is assigned in the order in which the boundaries of the respective type are created.
After the limit has been created, a box with the respective identification of the limit appears in the memory window in the area Limits.
Edit limits
An already created boundary can be edited by double-clicking on the box with the identifier in the Boundaries area or by right-clicking on the identifier -> edit. A new window opens for this purpose:
Here the minimum permissible discharge through the facility can be entered. After clicking the Function button, the content discharge function can also be entered as a limit function.
Assign a boundary of release/ delete assignment
A release can be assigned to a border by drag&drop. For this purpose, the box with the identifier of the levy is dragged onto the box with the identifier of the border. The connection is displayed with an arrow. Similarly, the connection can be deleted again.
Delete Boundary
To delete a boundary, right-click on the boundary and select Delete from the context menu.
Internal dependencies
Create new internal dependency
To create a new internal dependency between two releases, connect the two releases by dragging and dropping. To do this, drag the box with the identifier of the release that is to provide the condition for the reduction onto the box with the identifier of the release that is to be reduced. The connection is represented by an arrow. One release can reduce several other releases, for this purpose several connections are created from this release.
Edit internal dependency
To edit an already created internal dependency, first select the release that should provide the condition for the reduction and then click the button Edit Int. Dependency 
. Alternatively, after right-clicking on the delivery, select -> edit internal dependency from the context menu. After that a window appears
In the window that appears, you can enter the value that the release must exceed and the storage content must fall below in order to trigger a reduction of the other releases. The entry is made as a constant value, if necessary scaled with a hydrograph, which can be selected from the corresponding drop-down lists. At the bottom of the window the arrow buttons 
can change the order in which the release are to be reduced.
The order in which the deliveries are to be reduced can also be adjusted in the window that opens when you click the Sequence button 
from the save window.
Loss/ External contribution
External contribution/ losses at the reservoir in the form of precipitation, evaporation and infiltration can be entered in the lower area of the reservoir window. For this purpose, the checkbox next to the respective symbol is activated and a new window appears. This window can also be opened later by clicking on the symbol of the loss/subsidy.
Calculation method
The loss/external contribution term term can be entered either as a constant hydrograph (Attention: Designation in the GUI: Function (Btr.Rule)) or as a time series (Attention: Designation in the GUI: Function + File), if necessary scaled with a factor. Regardless of the selected calculation method, the storage loss/external contribution is automatically scaled with the current storage surface.
Simulation settings
In the Simulation Settings tab of the reservoir window, the initial conditions for the reservoir are set:
The initial reservoir content [Tsd.m³] can be entered in a text field. For orientation, the maximum content of the storage element is shown directly below. With the input the graphic with the filling level of the dam in the middle area of the window adjusts automatically and the filling level is output in percent.
For all substances already defined, the initial concentration [mg/l] is also specified here. To do this, select the substance from the drop-down list and enter the initial concentration in the text field next to it. It is important to click the Apply button afterwards 
, otherwise the entry will be lost when closing. If the button is not clicked after the change, a message window still appears, but the Yes button is inactive, i.e. it is not saved.
At the bottom of the window there is also the possibility to read the start value for the content from a time series. The value in the time series at the start of the simulation is set as the start value for the initial content. The selection of the time series from the Time series management is done via the button Selection 
. Via the button Display 
a window with a Graphics of the time series opens.