Zielpegel/en: Unterschied zwischen den Versionen
Doeser (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „Target water level“) |
Keine Bearbeitungszusammenfassung |
||
| (5 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt) | |||
| Zeile 3: | Zeile 3: | ||
{{Navigation|vorher=Speicher mit Wasserkraftanlagen|hoch=Beschreibung der Systemelemente|nachher=Berechnungsschema von Speichern}} | {{Navigation|vorher=Speicher mit Wasserkraftanlagen|hoch=Beschreibung der Systemelemente|nachher=Berechnungsschema von Speichern}} | ||
[[ | [[Datei:Symbol_Zielpegel.PNG|none]]The system outlet represents the outlet of the model and must be the last system element in the flow logic. It accepts only one element as its inflow and it has no outlet, i.e. no calculations are performed within the element. There must be exactly one system outlet per model. If there are actually several outlets from the modeled system, it is useful to add a fictitious [[Special:MyLanguage/Transportstrecke|transport reach]] immediately before the system outlet (e.g. with the key "SEND"), which in turn can accomodate several inflows. Alternatively, [[Special:MyLanguage/Verbraucher|consumers]] can also act as a sink. | ||
Aktuelle Version vom 26. November 2020, 16:46 Uhr
Navigation
| 
| 
| | 
The system outlet represents the outlet of the model and must be the last system element in the flow logic. It accepts only one element as its inflow and it has no outlet, i.e. no calculations are performed within the element. There must be exactly one system outlet per model. If there are actually several outlets from the modeled system, it is useful to add a fictitious transport reach immediately before the system outlet (e.g. with the key "SEND"), which in turn can accomodate several inflows. Alternatively, consumers can also act as a sink.